Ramming Mass

Product Details:

Silica Ramming Mass belongs to Acid group of refractories and is made from the purest raw materials available in this country. Very high purity of raw material gives high refractoriness to the mass. The mass has tendency to expand at about 800°C and this characteristic gives a very compact lining, showing high resistance to erosion and corrosion. The expansion tendency being reversible, crack formation during cooling does not occur. All these properties combine to give longer life to refractory lining even under extreme conditions of high temperature and heavy abrasion.

• Silica Ramming Mass is prepared after many years of experience and experiments in different ramming masses.
• Having experience of decades in mining and mineral trade helps us in procuring most suitable raw material available in this country.
• Higher purity ensures better refractoriness at higher temperature and gives good wear resistance combined with good corrosion resistance.
• Ideal grain distribution gives optimum compactness on ramming and forms complete monolithic crucible on sintering.
• The material has practically no free Iron particles and chemically combined Fe2O3 is less than 0.05%
• Silica Ramming Mass is suitable for different types and sizes of Induction furnaces requiring acidic lining.
• Special material can be prepared as per gradation desired by the user.
• Usually material is available from ready stock.
• The material does not contain any sintering agent. The user has facility to make addition as per his requirement. (i.e. Boric Acid should be added)

• GrainSize: 0 to 4 mm or 0 to 6mm

Product Details:

Silica Ramming Mass belongs to Acid group of refractories and is made from the purest raw materials available in this country. Very high purity of raw material gives high refractoriness to the mass. The mass has tendency to expand at about 800°C and this characteristic gives a very compact lining, showing high resistance to erosion and corrosion. The expansion tendency being reversible, crack formation during cooling does not occur.

All these properties combine to give longer life to refractory lining even under extreme conditions of high temperature and heavy abrasion.

• Silica Ramming Mass is prepared after many years of experience and experiments in different ramming masses.
• Having experience of decades in mining and mineral trade helps us in procuring most suitable raw material available in this country.
• Higher purity ensures better refractoriness at higher temperature and gives good wear resistance combined with good corrosion resistance.
• Ideal grain distribution gives optimum compactness on ramming and forms complete monolithic crucible on sintering.
• The material has practically no free Iron particles and chemically combined Fe2O3 is less than 0.05%
• Silica Ramming Mass is suitable for different types and sizes of Induction furnaces requiring acidic lining.
• Special material can be prepared as per gradation desired by the user.
• Usually material is available from ready stock.
• The material does not need any sintering agent. It is premixed ( Boron Oxide ) as per customer requirement.

• GrainSize: 0 to 4 mm or 0 to 6mm

Product Details:

• Our supplied cupola ramming mass is acclaimed for withstanding high temperatures and heat.
• The supplied cupola ramming mass is free from impurities for ensuring high performance in induction furnaces.

• While unpacking material please see that strings removed for opening bags are not mixed
• If you find such strings, please remove it without fail as otherwise it will burn out while cupola is in operation and metal penetration in burnt out portion and will damage the lining

• After the days run the worn out bricks surface should be cleaned off of the adhering metal/slag preferably by hand chisel
• To this cleaned portion, ramming mass handballs should be thrown
• The lining this build is hand dressed to correct counter

• The lining should be dried slowly
• Firing the wood can do this

Product Details:

• Silica Ramming Mass is prepared after many years of experience and experiments in different ramming masses
• Having experience of decades in mining and mineral trade helps us in procuring most suitable raw material available in this country
• Higher purity ensures better refractoriness at higher temperature and gives good wear resistance combined with good corrosion resistance
• Ideal grain distribution gives optimum compactness on ramming and forms complete monolithic crucible on sintering
• The material has practically no free Iron particles and chemically combined Fe2O3 is less than 0.05%
• Silica Ramming Mass is suitable for different types and sizes of Induction furnaces requiring acidic lining
• Special material can be prepared as per gradation desired by the user
• Usually material is available from ready stock
• The material does not need any sintering agent.
• It is premixed (Boric Acid) as per customer requirement

Additional Information:

• Item Code: ADRAM-IN-PM

Product Details:

Product Details:

Product Details: