Coating Powder

Product Details:

• "COIL SET" is a Magnesia based coil coating two component system.
• It comes in the form of a fine powder and a solution.
• When it is mixed a chemical reaction takes place and it sets hard like a stone in about 3 hours.
• No external heating with bulb or heater is required.
• You are free from worry of moisture evaporation as the solution gets reacted and no moisture is left behind.
• As the material comes in fine powder form you are not required to screen the material as you are doing while using other castable cements, thus cost saving is also achieved.
• No water addition hence no moisture evaporation period required.
• As it sets hard no maintenance is required at the time of every lining.

• It is highly resistant to thermal and mechanical shocks.
• Forms hard protecting layer on setting.
• It resists very high temperature.
• Protects coil at time of metal leakage.

• Take 2 part powder and 1 part solution by weight.
• Mix thoroughly to form paste.
• Apply on the coil in desired thickness.
• Allow it to set for about 3 hours, till it gets hard like stone.
• For faster setting external heat can be given.

• Close bag tightly as atmospheric moisture will affect the powder.
• Store in a cool dry place.